RL-08: 8 output module for Web-Yacht

The RL-08 module allows you to control (turn on and off) more on-board devices, such as refrigerators and lights.

The RL-08 has eight outputs:

Six outputs with a relay ‘on / off, useful to activate any switch, such as refrigerators, pumps, air conditioning; Two PWM outputs, adjustable, useful to control LED lights with dimmer effect. All additional modules are connected to Web-Yacht via WiFi so you do not need any kind of cabling. Only the connection to 12 V is needed.

RL-02: Dual output module for Web-Yacht

The RL-02 module allows you to control (turn on and off) more on-board devices, such as refrigerators and lights.

The RL-02 has two outputs:

• One with a relay ‘on / off, useful for checking refrigerators or pumps
• A PWM output, adjustable, useful to control LED lights with dimmer effect

All additional modules are connected to Web-Yacht via WiFi so you do not need any kind of cabling. Only the connection to 12 V is needed.

IN-02: two digital inputs to Web-Yacht

IN-02 has two digital inputs to Web-Yacht. It can be used to connect a magnetic contact (applied on a door or on a window), an infrared sensor or the sensor 220 VOLT quay.

All additional modules are connected to Web-Yacht via WiFi so you do not need any kind of cabling. Only the connection to 12 V is needed.

WFP: Infrared detector module

The WFP module is an infrared motion detector typically used to detect the presence or absence of persons in the environments. Using one or more WFP modules, one can monitor several rooms and create specific alerts on Web-Yacht.

We have two versions of PIR:

• Direct – connected directly to one of the two inputs of Web-Yacht
• WiFi – the module connects to the WiFi network of Web-Yacht. To install it, only the  12V is needed.

220-OC Module

The 220-OC module enables to detect the status of the shore power: if is present or not.

The 220-OC module is installed inside the framework 220 V and can be directly connected to one of two native inputs of Web-Yacht, or to an IN-02 module.

The 220-OC module advises you if the 220V shore is properly connected and sends you alarms in case of disconnection, long before the on-board batteries are discharged.

CNV-ST: SeaTalk converter

The CNV-ST enables Web-Yacht to read the Raymarine equipment that uses the SeaTalk protocol.

NMEA2000 converter

For all boats using the new NMEA2000, this converter allows quick and easy interfacing to Web-Yacht.

RPM: Tachometer

For older boats  who have a hall sensor that sends impulses to the tachometer, we developed this wireless connection module, which, using a 868 MHz link, sends to Web-Yacht the tachometer pulses, to register the RPM.